Use este identificador para citar ou linkar para este item:
http://repositorio.ufla.br/jspui/handle/1/56410
Título: | Avaliação física e mecânica de compósitos de gesso reforçados com fibra de Bambusa tuldoides |
Título(s) alternativo(s): | Physical and mechanical evaluation of plaster composites Bambusa tuldoides fiber-reinforced plaster composites |
Palavras-chave: | Análise química Fibras vegetais Matriz cerâmica Chemical analysis Vegetal fibers Ceramic matrix |
Data do documento: | 9-Dez-2022 |
Editor: | Universidade Federal do Rio de Janeiro (UFRJ), Laboratório de Hidrogênio |
Citação: | ALVARENGA, B. L. et al. Avaliação física e mecânica de compósitos de gesso reforçados com fibra de Bambusa tuldoides. Revista Matéria, Rio de Janeiro, v. 27, n. 2, 2022. DOI: 10.1590/S1517-707620220002.1387. |
Resumo: | This research aimed to evaluate the potential of Bambusa tuldoides as reinforcement in the plaster matrix. The basic density, fiber dimensions and chemical constitution of the raw material were determined. Composites were produced with volume replacement of gypsum paste by 0, 5, 10, 15, 20, 25 and 30% of bamboo with a water / gypsum ratio of 1: 1. For the mechanical characterization of the composites, static bending, compression and bulk density tests were performed. The values obtained in the fiber evaluation presented values close to the literature. In the characterization of composites all properties had significant quadratic regression and it was possible to verify similar behavior between mechanical properties and density. In density there was an increase of its value up to the percentage of 17.41% that can be justified due to the absorption of water by the fiber due to the presence of scores, which generates a decrease in the water plaster ratio and an increase in density. The decrease in density from 17.41% is related to the large amount of fibers present that get tangled and cause voids since the plaster paste cannot infiltrate these places. In compression, the percentages between 3.37 and 26.19% are those that met the normative requirements (greater than 2 MPa), and in flexion the percentages between 0 and 27.23% are those that comply with the standard (greater than 1 MPa). The results showed that the use of Bambusa tuldoides as reinforcement is viable between 3.37 and 26.19% to meet all regulatory requirements. |
URI: | http://repositorio.ufla.br/jspui/handle/1/56410 |
Aparece nas coleções: | DEG - Artigos publicados em periódicos |
Arquivos associados a este item:
Arquivo | Descrição | Tamanho | Formato | |
---|---|---|---|---|
ARTIGO_Avaliação física e mecânica de compósitos de gesso reforçados com fibra de Bambusa tuldoides.pdf | 646,73 kB | Adobe PDF | Visualizar/Abrir |
Este item está licenciada sob uma Licença Creative Commons