Use este identificador para citar ou linkar para este item:
http://repositorio.ufla.br/jspui/handle/1/48063
Título: | Physical and mechanical behavior of glulam beams produced with rubberwood treated with preservatives |
Título(s) alternativo(s): | Comportamento físico e mecânico de vigas laminadas coladas produzidas com madeira de seringueira tratada com preservativos |
Palavras-chave: | Adhesive wood bonding Static bending Delamination Preservative treatment Ligação madeira adesivo Flexão estática Delaminação Tratamento preservativo |
Data do documento: | Nov-2020 |
Editor: | Universidade Federal de Lavras |
Citação: | FARIA, D. L. et al. Physical and mechanical behavior of glulam beams produced with rubberwood treated with preservatives. Ciência e Agrotecnologia, Lavras, v. 44, e012020, 2020. DOI: http://dx.doi.org/10.1590/1413-7054202044012020. |
Resumo: | This work aimed to evaluate the physical and mechanical behavior of glued laminated timber (GLT) - glulam pieces of Hevea brasiliensis treated with chromed copper arsenate (CCA), chromed copper borate (CCB) and pyrethroid in the production of GLT. The pieces were produced using three wooden laminae with dimensions of 60 x 20 x 1200 mm, (width x thickness x length), joined with epoxy adhesive under 1.0 MPa pressure for 24h at room temperature. The rubberwood had an apparent density of 0.624 g cm-3, a value close to that of Eucalyptus grandis wood, a species traditionally used in the manufacture of GLT. Regarding the GLT parts, it was observed that the preservative treatment with CCA and CCB influenced negatively the values of the mechanical properties. For resistance modulus (MOR), a reduction of 75.44 MPa to 62.36 and 58.57 MPa was found for the parts untreated and treated with CCA and CCB, respectively. There was no statistical difference for surface treatment with pyrethroid. The photomicrographs of the glue line showed that the reduction in these values was mainly due to the penetration of preservative solutions into the wood structure (cell lumens and vessels or pores), impairing the anchoring of the adhesive. |
URI: | http://repositorio.ufla.br/jspui/handle/1/48063 |
Aparece nas coleções: | DCF - Artigos publicados em periódicos DEG - Artigos publicados em periódicos |
Arquivos associados a este item:
Arquivo | Descrição | Tamanho | Formato | |
---|---|---|---|---|
ARTIGO_Physical and mechanical behavior of glulam beams produced with rubberwood treated with preservatives.pdf | 2,52 MB | Adobe PDF | Visualizar/Abrir |
Este item está licenciada sob uma Licença Creative Commons