Please use this identifier to cite or link to this item:
http://repositorio.ufla.br/jspui/handle/1/42425
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.creator | Marques, Leomar Santos | - |
dc.creator | Magalhães, Ricardo Rodrigues | - |
dc.creator | Lima, Danilo Alves | - |
dc.creator | Tsuchida, Jefferson Esquina | - |
dc.creator | Fuzzato, Diego Cardoso | - |
dc.creator | Andrade, Ednilton Tavares | - |
dc.date.accessioned | 2020-08-14T18:35:22Z | - |
dc.date.available | 2020-08-14T18:35:22Z | - |
dc.date.issued | 2020-04 | - |
dc.identifier.citation | MARQUES, L. S. et al. Finite element analysis of a commercial wheelchair. Disability and Rehabilitation: Assistive Technology, London, 2020. DOI: 10.1080/17483107.2020.1749893 | pt_BR |
dc.identifier.uri | https://doi.org/10.1080/17483107.2020.1749893 | pt_BR |
dc.identifier.uri | http://repositorio.ufla.br/jspui/handle/1/42425 | - |
dc.description.abstract | Due to the structural constraints of wheelchairs for users with motor disabilities, it is essential to understand and ensure their proper functioning for the quality of life of these users. The main objective of this study is to analyze the stresses and displacements in a wheelchair using the finite element method to evaluate its functional and structural aspects though simulations. Influenced by normative techniques that consider ergonomic, anthropometric and biomechanical, factors were considered to verify the compliance of this equipment considering current standards. Results were compared with experimental analyses performed by the Brazilian National Institute of Metrology, Quality and Technology (INMETRO). Results showed that von Mises stress limit values were exceeded in the chair frame by 6.5%, in the collision analysis by 72.1%, and in the footrest by 189.4%. This indicated that the structure of the analyzed wheelchair is not adequated based on simulation results, same as INMETRO reports. | pt_BR |
dc.language | en | pt_BR |
dc.publisher | Taylor & Francis Group | pt_BR |
dc.rights | restrictAccess | pt_BR |
dc.source | Disability and Rehabilitation: Assistive Technology | pt_BR |
dc.subject | Wheelchair | pt_BR |
dc.subject | Finite element analysis | pt_BR |
dc.subject | Stress analysis | pt_BR |
dc.subject | Disablity | pt_BR |
dc.subject | Análise de elementos finitos | pt_BR |
dc.subject | Cadeiras de rodas | pt_BR |
dc.subject | Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO) | pt_BR |
dc.title | Finite element analysis of a commercial wheelchair | pt_BR |
dc.type | Artigo | pt_BR |
Appears in Collections: | DAT - Artigos publicados em periódicos DEG - Artigos publicados em periódicos DFI - Artigos publicados em periódicos |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.